The Most Important Tyre Maintenance Tips have Finally been Revealed!

Since tyres are the most important part of a vehicle in terms of both safety and overall driving experience, here are some of the most important tyre maintenance tips to help you maintain your most trusted Nexen tyres and have better driving experience.

1. Check tyre valve caps

Tyre valve caps are very important in terms of keeping the valve clean and safe from external debris, however, the majority of us ignore that. In fact, it is highly recommended as well as extremely important to make sure that valve caps are intact and properly secured on the valve.

It’s critical to supplant valve caps in case it gets lost and your valve is vulnerable to water and garbage.

2. Wheel balancing

Fundamentally wheel balancing is extremely significant in terms of overall handling and safety, that is why you ought to perform wheel balances at constant intervals.

Wheel balancing guarantees that each wheel gets equivalent contact out and about with the road by adjusting the loads on each wheel.

Side effects of unbalanced wheels incorporate abnormal vibrations felt throughout the entire steering framework. Also, unbalanced wheels can cause the suspension to wear out prior to its promised mileage.

3. Always have a spare tyre

Remember to routinely check your spare tyre and keep it maintained.

Our spare tyres are frequently the final hope in a time of the tyre failure in the middle of nowhere. That is why regardless of the type of the vehicle and tyres you have, it’s essential to have a spare tyre at all times.

Same like your normal tyres a spare tyre is also needed to be replaced upon the date of its expiry, which usually is 5-6 years even if the tyre has never been used.

4. Perform periodic tyre pressure checks

It’s essential to check your tyre pressure when tyres are cold (meaning tyres are at rest from at least 2 hours), as it will give you the most accurate reading. While you drive, your tyres warm-up and the air pressure inside the tyre expands, giving you a false, higher psi reading than they are truly at.

In the event that you do check your tyre pressure while the tyres are hot (meaning when you have presently driven your vehicle and parked it shortly), add an additional 4 PSI to the prescribed tyre pressure of the tyre.

It is highly recommended by many tyre manufacturers and sellers that you check your tyre pressure at least once every 15 days.

5. Finding the recommended tyre pressure

You can discover the recommended tyre pressure as per follows:

  • On the placard posted at the front door jam
  • On the inner side of the fuel flipper flap
  • On the tyre itself
  • In the owner’s manual

In case you’re still unclear on where to discover recommended tyre pressure or still not certain what pressure your tyres ought to be at, visit your nearby tyre service centre or contact customer support of any online tyre shop.

6. Least acceptable tread depth

As you drive, your tyres tread wear’s out. The tread depth on your tyres is directly proportional to braking and overall handling of the vehicle. The less the tread you have on tyres the worse the performance of the vehicle will be in terms of handling. In wet conditions, handling could get more worst and even dangerous.

For the most secure driving conditions, you ought to supplant your vehicle’s tyres when you have under 2mm of tread depth left.

7. Ways to check the tread depth

You can utilize a Lincoln head on a coin to check your tyre’s tread depth. In the event that head appears while inserted into treads groove, it’s an indication that you need to change the tyre.

Likewise, you can also use a tread depth check card to check the tread depth of the tyre, which you can conveniently obtain from any nearby tyre shop.

For precise measurement of the tread depth, you can use a tread depth gauge.

8. Have same and compatible tyres

Because of the various qualities of various tyres,  it’s constantly imperative to have the same tyres on your vehicle. Blending different brands and tread designs of tyres on the same vehicle can cause major problems in terms of handling due to different key specifications of different tyres.

To have a better and safe overall driving experience, consistently stick with a similar arrangement of four coordinating tyres on your vehicle.

9. Wheel alignment

Primarily, wheel alignment is ought to be done to guarantee even wear and expand the life of the tyres.

A wheel alignment guarantees that every one of the wheels lines up with the vehicle’s centreline as per the recommendations of the vehicle manufacturer. Wheel alignment also prompts effective handling of the vehicle. Whereas misaligned wheel causes the vehicle to drift to one side again and again hence requiring frequent steering adjustments.

10.  Perform a visual inspection of tyre

Indeed, even the littlest cut that seems negligible can cause a leak in your tyre. When checking your tyre pressure occasionally, investigate your tyres for sidewall and tread harm. On the off chance that you think you have a minor or a big cut, visit a nearby tyre service centre to get your tyre fixed or supplanted in a worst-case scenario.

Ultimately, it is important that you occasionally eyeball your tyres and keep their visual health in check.

About Editor

Leave a Comment